Stewart Audio World Series

To Next Page

World Series

Professional Power Ampli er

The Stewart Audio World 2.1 Professional Power Ampli er

is designed speci cally for the unique requirements of

high quality commercial, industrial and Pro Audio sound

installations. The World 2.1 produces sound which is

smooth and uncolored, while offering a full detailed low

end response with lots of horsepower. The high-frequency

switch mode power supply and Class H ampli er design

adapt to the demands placed upon them, enabling the

ampli er to run with maximum ef ciency regardless of the

load impedance. With incredible ef ciency, up to 4 World

2.1’s can typically run on one standard 20 amp circuit.

Weighing in at just 17 lbs and occupying two standard rack

spaces, the World 2.1 is the perfect balance of power and

sonic performance.

World 2.1

650W x 2 @ 4 Ohms

400W x 2 @ 8 Ohms

1800W x 1 @ 4 Ohms bridged

1300W x 1 @ 8 Ohms bridged

Features:

• Two channel ampli er, optimized to

drive 4 Ohm and 8 Ohm loads.

• Variable speed fan

• Clean full–range dynamic power

• Bridgeable

• Ultra ef cient switch mode power supply

• 3 Years parts and labor warranty

• Made in the USA

Applications:

• Sound Reinforcement

• Pre/Post Productions

• Music and Paging Systems

• High Quality Distributed Sound Systems

• Fixed Installations

• Instrument Rigs

• UL Certi cation

14397 Cuesta Court Ste D1 • Sonora, CA 95370 • TEL: 209.588.8111 • www.stewartaudio.com

Need help?

Do you have a question about the Stewart Audio World Series and is the answer not in the manual?

Summary

World 2.1 Amplifier Overview

Product Description

Detailed description of the World 2.1 amplifier's design, performance, efficiency, and physical attributes for professional sound installations.

Key Features and Applications

Highlights features like two-channel design, efficient power supply, and lists applications from sound reinforcement to instrument rigs.

World 2.1 Specifications

Technical Specifications

Detailed technical data including output power, frequency response, SNR, THD+N, damping factor, slew rate, dimensions, weight, and warranty.

Architects & Engineering Specifications

Performance requirements for the amplifier, covering output power, cooling, protection circuitry, voltage gain, input sensitivity, and physical standards.