31
POWER Use a standard 9 volt DC power supply with a
2.1mm negative-center barrel (not included). We always
recommend pedal-specic, transformer-isolated,
wall-wart power supplies or supplies with separate
isolated outputs. Some switching supplies, as well as
some linear (non-switching) pedal power supplies can
be noisy. Switching-type power supplies, daisychains,
and non-pedal specic power supplies do not lter
dirty power as well and let through unwanted noise.
Do not run at higher than 9V DC voltages!
FUZZ This controls the amount of fuzz you hear in
the signal.
TONE Controls the voltage going to the transistors.
Which can alter the sound greatly from thin and
sputtery, to fat and very full.
VOLUME This controls the output of the pedal.
HERE’S HOW THE CONTROLS WORK
To Next Page
Loading...