_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 4028 – rev.06 11/2018 – FT - 8 -
3.0 GENERAL SAFETY INSTRUCTIONS
In order that you can make the best use of this document and to ensure safety during commissioning, operation and
maintenance of the equipment, please note the following explanation of the symbols used: as well as the instructions
in this document, you must also follow applicable accident prevention and safety regulations.
Please read this document carefully before installation and commissioning.
Symbol definitions
DANGER_
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. (High level of
risk)
WARNING_
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (Medium
level of risk)
CAUTION_
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. (Low level
of risk)
NOTE_
Indicates a potentially harmful situation which, if not avoided, may result in damage of the product itself or of
adjacent objects. (Damage to property)
Signs of warning
Be careful where these symbols are shown, they indicate a potentially hazardous situation and they warn that if the
steps are not properly performed, MAY RESULT CAUSING serious injury, death or long-term risks to the health of
exposed persons.
Safety measures
This chapter provides important instructions for your safety. Proper and safe operation of the FT positioner requires:
• proper transportation and storage;
• mounting, electrical and pneumatic installation and commissioning by qualified personnel;
• correct operation according to the instructions in this manual;
• correct use;
• careful maintenance.
To Next Page
