Need help?Do you have a question about the Stid SPECTRE Series and is the answer not in the manual?
Details SPECTRE Module (SMA) and Reader (SLA) types, frequency bands, and communication protocols.
Covers power supply requirements, communication interfaces, operating temperature, protection, and LED indicators.
Advises on placement, power, interference, and user proximity to antennas for optimal installation.
Explains connector access and identifies front-view components like LEDs and RF ports.
Details the TTL/RS232/RS485 and I/O connection pinouts and configurations for the modules.
Explains how to configure communication protocols, including Wiegand and serial data frames.
Describes the LED indicators and sequence during reader startup, tag detection, and configuration.
Provides detailed physical dimensions for the SPECTRE SMA module in millimeters and inches.
Outlines two mounting possibilities: VESA bracket or direct wall mounting for the SMA module.
Explains how to connect antennas to RF port 1 and lists available cable lengths and combinations.
Provides detailed physical dimensions for the SPECTRE SLA reader in millimeters and inches.
Outlines two mounting possibilities: VESA bracket or direct wall mounting for the SLA reader.
Details connecting antennas to RF port 1, cable types, and available lengths for SLA readers.
Lists technical specifications for the ANT-UHF-V2 antenna, including frequency, gain, polarization, and beamwidth.
Describes how to mount the antenna using a VESA bracket or specialized kits (wall/pole).
Presents azimuth radiation patterns for horizontal and vertical polarization at different frequencies.
States compliance with RED, RoHS, FCC, and ISEDC regulations, including RF exposure limits.
General| Brand | Stid |
|---|---|
| Model | SPECTRE Series |
| Category | Card Reader |
| Language | English |
To Next Page
