Need help?Do you have a question about the STIEBEL ELTRON CNS Series and is the answer not in the manual?
General| Voltage | 230V |
|---|---|
| Installation | Wall-mounted |
| Thermostat | Built-in adjustable thermostat |
| Color | White |
| Frost protection | Yes |
| Overheat protection | Yes |
| Heating Type | Electric |
| Protection Class | IP24 |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Type | Convection Heater |
| Power Output | 500W to 3000W |
| Power Supply | Mains connection |
Instructions for setting the current time and date on a brand new CNS heater.
Procedure to set or reset the current time and date on a CNS heater that has been previously switched on.
Guide to configuring desired comfort and minimum setback temperatures for room heating.
Overview and selection of available heating programmes (Pro1, Pro2, Pro3).
Description of the factory-set Pro1 programme for daily use (Monday to Sunday).
Description of the factory-set Pro2 programme for weekdays (Monday to Friday).
Information on the Pro3 custom programme for individual daily settings.
Instructions on how to select and activate a desired heating programme.
Guide to setting start and end times for comfort mode in programmes Pro1 and Pro2.
Instructions for configuring comfort phase start and end times for programme Pro3.
Overview of advanced controls and configurable display options for the heater.
To Next Page
