STIEBEL ELTRON CNS Series - Setting Comfort and Back Temperatures; Step 2: Set Comfort and Setback Temperatures; Heating Programme Selection; Step 3: Choose Heating Programme

Technical datasheet
Step 2: Set your required comfort and setback temperatures
1. Press the menu button until the time is displayed
2. Press the plus button – you will see a sun symbol. This signifies your
comfort setting; the temperature you want the room to reach when you
are using it
3. Press the OK button
4. Use the plus and minus buttons to set the required temperature.
5. Press the OK button
6. Press the plus button – you will see a crescent moon symbol. This
signifies your setback setting; the temperature that you never want
your room to fall below.
7. Press the OK button
8. Use the plus and minus buttons to set the required temperature.
9. Press the OK button
10. Wait for the screen light to dim
Step 3: Choose your heating programme
About the programmes