To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON SHC 4 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Weight | 15.9 lbs |
| Dimensions (H x W x D) | 18.7 x 11 x 10.2 inches |
| Protection Class | IP24 |
| Flow rate | 2.0 l/min at 35 K temperature rise |
| Maximum Flow Rate | 2.0 l/min at 35 K temperature rise |
Essential safety guidelines and warnings for operating the water heater.
Instructions for registering the product to activate warranty.
Overview of the water heater's purpose and features.
Details on materials, thermostat, and relief valve.
Advice on installation location and code compliance.
Steps and precautions for physically installing the unit on a wall.
Guidance on connecting water inlet and outlet pipes and related fittings.
Procedure for filling the tank before electrical connection.
Instructions for safe and proper electrical hookup.
How to adjust the thermostat and use freeze protection.
Methods and frequency for removing mineral scale.
Procedure for testing and venting the temperature/pressure relief valve.
Steps required to empty the water heater tank.
Instructions on how to safely remove the unit's outer cover.
Steps for disassembling and removing the heating element.
Detailed methods for cleaning mineral deposits from the element.
Procedure for installing a new heating element.
How to inspect and replace the sacrificial anode rod.
Specifications, dimensions, and performance data for models.
Information on the high temperature shut-off and reset procedure.
Diagrams and measurements for SHC 2.5, SHC 4, and SHC 6 models.
Schematic showing electrical connections and components.
Terms, conditions, and limitations of the product warranty.
