EasyManua.ls Logo

STIEBEL ELTRON Stratos Brahma 9.0 User Manual

STIEBEL ELTRON Stratos Brahma 9.0
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Gas Room Heater
Stratos Brahma
Question and Answer IconNeed help?

Do you have a question about the STIEBEL ELTRON Stratos Brahma 9.0 and is the answer not in the manual?

STIEBEL ELTRON Stratos Brahma 9.0 Specifications

General IconGeneral
Voltage400 V
Amperage13 A
IP ratingIP25
Protection ClassI
ColorWhite
Power rating9 kW
Water connection1/2 inch
Frequency50 Hz
Installation TypeWall mounted

Summary

General Information, Safety Rules, and Precautions

Basic Safety Guidelines

Covers child safety, gas leaks, wet hands, and cleaning procedures.

Prohibited Actions and Warnings

Warns against modification, placing items, and using flammable materials.

Unit Structure

Technical Specifications

Performance Data Table

Key technical data including consumption, ratings, and weights.

Electrical Schematics

Control Panel and Display

Installation: Wall or Floor Mounting

Appliance Location Requirements

Criteria for choosing a safe and suitable installation location.

Flue Assembly Dimensions

Fitting Template, Union, and Pipes

Template and Pipe Installation Steps

Procedure for fitting the template, union, and pipes to the wall.

External Component Installation

Remote Digital Control Installation

Floor Standing Installation

Mounting Floor Support Structure

Instructions for assembling and attaching the floor standing support.

Protection for Combustible Walls

Silumina Frame Assembly Fitting

Steps for installing the frame assembly on wooden or combustible walls.

Power and Gas Connection Procedures

Power Connection Requirements and Safety

Details for authorized installers and electrical safety precautions.

Gas Connection and Seal Testing

Instructions for connecting gas type, fittings, and performing seal tests.

Preliminary Operations, Start-Up, and Malfunctions

First Service Start Procedure

Step-by-step guide for the initial appliance start-up.

Control Unit Operation and Gas Pressure

Gas Pressure Verification and Control

Procedures and table for checking gas pressures and operating controls.

Gas Conversion Process

Injector Replacement and Reassembly

Detailed steps for replacing injectors and reassembling components.

Gas Regulation Procedures

Natural Gas Pressure Regulation

Steps for regulating nominal and minimum pressures for natural gas.

ULPG Pressure Regulation

Steps for regulating pressures for ULPG.

Component Replacement Overview

Electrode and Pressure Switch Tube Replacement

Procedures for replacing electrodes and checking pressure switch tubes.

Component Replacement Procedures

Fan and Probe Replacements

Covers room probe, convection fan, and combustion air fan replacement.

Component Replacements

Casing and Fault Finding Procedures

Appliance Start-Up Faults

Causes and remedies for appliance failure to start or operate properly.

Troubleshooting Common Faults

Thermostat and Ignition Issues

Covers thermostat engagement and ignition spark faults.

Burner and Heating Performance Faults

Addresses burner shutdown, heating issues, and fan problems.

Australian Consumer Law Rights

Related product manuals