EasyManua.ls Logo

STIEBEL ELTRON WWK 300 AH User Manual

STIEBEL ELTRON WWK 300 AH
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OperatiOn and installatiOn
dHW Heat pump
» WWK 300 a
» WWK 300 ap
» WWK 300 aH
» WWK 300 aHp
280010-36039-8627 WWK 300 AHP en_AU.indb 1 24.01.2011 13:36:31

Other manuals for STIEBEL ELTRON WWK 300 AH

Question and Answer IconNeed help?

Do you have a question about the STIEBEL ELTRON WWK 300 AH and is the answer not in the manual?

STIEBEL ELTRON WWK 300 AH Specifications

General IconGeneral
TypeHeat Pump Water Heater
ApplicationDomestic Hot Water
Energy Efficiency ClassA+
Water Tank Capacity300 liters
Tank Volume300 liters
RefrigerantR134a
Protection ClassIP24
Max. DHW Temperature with Heat Pump65 °C
Rated Voltage230 V
Noise Level45 dB(A)

Summary

Operating Instructions for Users and Contractors

Operation and Control

How to operate and control the heat pump.

Device Description

Describes the components and function of the device.

Correct Operation

Explains the intended and proper use of the heat pump.

Incorrect Operation

Lists prohibited actions and incorrect usage scenarios.

Function Description

Details the standard operating mode and heat pump function.

Defrost Features

Explains active and passive defrost features for different models.

Maintenance and Cleaning

Covers routine maintenance and cleaning procedures for the device.

User Troubleshooting

Provides guidance for common user-reported issues and solutions.

Installation Instructions for Contractors

Regulations and Standards

Lists applicable regulations, standards, and local utility requirements.

Installation and Positioning

Details transport, positioning, and installation steps for the unit.

Water Connection

Explains the correct procedures for connecting water supply and drainage.

Power Supply

Outlines the requirements and procedures for connecting electrical power.

Commissioning

Details the steps for commissioning the unit and instructing the user.

Safety Equipment and Maintenance

Covers the safety features, their function, and maintenance requirements.

Equipment Safety Devices

Covers safety cut-outs, pressure limiters, thermoswitch, and protective anode.

Maintenance and Cleaning Procedures

Details cleaning the evaporator, draining the cylinder, and descaling.

System Valve Checks and Maintenance

Covers checks and maintenance for system safety and pressure reducing valves.

Specifications

Provides detailed technical specifications and data for the heat pump models.

Warranty

Australian Warranty Terms

Specific warranty terms and conditions for Australia.

Environment and Recycling

Related product manuals