Need help?Do you have a question about the STIEBEL ELTRON SHP-F 300 X Premium and is the answer not in the manual?
General| Type | Air-to-Water Heat Pump |
|---|---|
| Capacity | 300 liters |
| Energy Efficiency Class | A++ |
| Weight | 120 kg |
| Coefficient of Performance (COP) | 4.0 |
| Maximum Flow Temperature | 65°C |
| Power Supply | 230 V / 50 Hz |
| Refrigerant | R290 |
Key safety warnings, documentation symbols, units of measurement, and output data interpretation.
Specifies intended use and provides general safety guidelines for appliance operation.
Details on test symbols, heat pump operation, DHW heating, and limits.
Covers display, controls, key settings, external signals, units, and fault codes.
Explains manual heat-up functions and emergency operational modes.
Essential safety guidelines and adherence to national/regional installation rules.
Details standard delivery contents and required/optional accessories.
Guidelines for transport, storage, and selecting the installation site.
Instructions for connecting air ducts to the appliance.
Covers cold/DHW lines, safety valves, drains, circulation, and insulation.
Warnings on oxygen diffusion and solar circuit water quality.
Instructions for properly installing the condensate drain system.
Details standard, switched power, and external signal transmitter connections.
Covers initial start-up, fan settings, cylinder filling, checks, and handover.
Detailed dimensions and connection points for SHP-F 220, 300, and 300 X models.
Schematic showing electrical components and their interconnections.
Lists potential faults, their causes, and recommended remedies.
Comprehensive table of technical specifications and performance data.
Key adjustable parameters for appliance operation and settings.
Details the warranty conditions and limitations for the appliance.
Guidance on proper disposal and environmental considerations.
To Next Page