STIEBEL ELTRON HPG-I 04 S Premium User Manual

OPERATION AND INSTALLATION
Ground source heat pump
» HPG-I 04 S Premium
» HPG-I 06 S Premium
» HPG-I 08 S Premium
» HPG-I 12 S Premium
» HPG-I 15 S Premium
» HPG-I 04 CS Premium
» HPG-I 06 CS Premium
» HPG-I 08 CS Premium
» HPG-I 12 CS Premium
» HPG-I 15 CS Premium

STIEBEL ELTRON HPG-I 04 S Premium Specifications

General

Type	Air-to-Water Heat Pump
Model	HPG-I 04 S Premium
Manufacturer	STIEBEL ELTRON
Heat Sink	Water
Energy Efficiency Class (Heating)	A++
Operating Temperature Range (Heating)	-20°C to +35°C
Heat Source	Air
Refrigerant	R290

Summary

Special Information

Operation

General Information

Overview of the manual's purpose and scope for users and qualified contractors.

Safety

Intended Use

Defines the appliance's design for heating, DHW, and cooling rooms, for domestic use.

Safety Instructions

Details requirements for qualified contractors, installation, and appliance operation.

INSTALLATION

Maintenance and Care

Details cleaning, maintenance, and recommended inspection by qualified contractors.

Troubleshooting

Provides a table for common faults, their causes, and remedies.

Installation Safety

Emphasizes the role of qualified contractors and the use of original accessories for reliable function.

General Safety Instructions

Appliance Description

Function

Preparation

Safety Concept

Ensures clear apertures, proper sealing tape, and safe handling of refrigerant gas.

Installation Site

Electrical Installation

Installation

Installing the Heat Source System

Connection and Filling with Brine

Heating Water Connection

Filling the Heating System

Electrical Connection

General Electrical Connection

Emphasizes isolation from power supply before work and qualified contractor involvement.

Electrical Connection Procedures

Covers filling the system, terminal locations, cable routing, and strain relief fittings.

Compressor and Emergency/Booster Heater Connection

Details connection options for the compressor and electric emergency/booster heater.

Connection Option A (230 V)

Connection Option B (400 V)

Heat Pump Manager Terminal Assignment

Commissioning

Pre-Commissioning Checks

Covers essential checks for heating system, heat source, sensors, and safety cut-outs before operation.

Initial Start-up Procedures

Troubleshooting

Removing Casing Parts

Resetting High Limit Safety Cut-Out

Explains how to reset the safety cut-out and check heating water circulation.

Resetting Compressor Tempering Device

Guides on resetting the compressor tempering device after shutdown due to high hot gas temperature.

Checking IWS DIP Switch Settings

Details how to check DIP switch settings for WP-Typ and BA for correct heat pump type and operation.

IWS LEDs Indicator

Explains the meaning of red and green LEDs on the IWS for fault indication and system status.

Reset Button

Specification

Dimensions and Connections

Wiring Diagram

Output Diagrams

Data Table

Presents detailed technical data for HPG-I S Premium models, including output, consumption, and electrical data.