1. General introduction
CBA-2006-G-EN04641 1
General introduction
The manual is intended for the user of this device. It contains all the information necessary for operating
and cleaning this product. Please read all information and instructions carefully before using the product.
Symbols mark warnings, important notes, tips, etc. in this manual.
Stienen has compiled this manual with all due care. If you find any errors, please let us know.
1.1 Symbols and definitions
Risk of injury by dangerous electric shock. Danger to people and animals.
Warning indicating danger to product, people and animals if procedures are not strictly complied
with.
Warning indicating damage to products if procedures are not strictly complied with.
Pressure cleaning is not allowed.
Collect as separate flows
Example of a concrete application of the functionality described.
1.2 Customer service
If you have any questions, please contact your installer. Be sure to have all the necessary data handy. You
should also always write down the cause of a fault and the circumstances that occurred during the fault.
This will enable you to avoid any ambiguities and it will enable your installer to deal with any faults quickly
and effectively.
To Next Page