EN - 8
1.
pressed.
(Fig. 23)
(Fig. 32).
Press and hold the control lever
for 2-3 seconds (Fig. 25).
.
2.
Contact an authorised Technical
3.
Obstructions that prevent
rotation of the blade.
and/or the discharge channel.
•
• Obstructions that prevent
rotation of the blade.
•
in the chassis and discharge channel.
•
•
•
•
4. The cut grass is
not collected in the
grass catcher.
Clean the inside of the chassis to
the grass catcher (par. 7.2.2).
5. The blade is not in good condition Contact a Technical service centre for the
6.
vibration is
Contact an authorised Technical
7.
greater current absorption.
To Next Page
Loading...
