EN - 7
•
•
6.5 STOP
1.
2.
3.
•
• When driving on grass free surfaces.
•
• Before adjusting the cutting height.
•
6.6 AFTER OPERATION
1.
2.
in an enclosed space.
3.
4.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or dangers.
Before conducting any inspections, cleaning or
maintenance/adjustment interventions on the machine:
• Stop the motor.
•
come to a complete stop.
•
•
•
•
IMPORTANT Any maintenance and adjustment
operations not described in this manual must be carried
out by your dealer or Authorised Service Centre.
7.2 CLEANING
7.2.1 Cleaning the machine
•
• Do not use aggressive liquids to clean the chassis.
•
7.2.2 Cleaning the grass-catcher
1.
2.
3. Wash and rinse it, then place it
7.2.3 Cleaning the cutting-means assembly
7.3 NUTS AND BOLTS
8. OCCASIONAL MAINTENANCE
8.1 CUTTING MEANS
Do not touch the cutting means until the machine
is switched o and the cutting means is completely
stationary.
All work on the cutting means (disassembly, shar-
pening, balancing, repairing, reassembly and/or repla-
cing) are demanding jobs that require special skills as
well as special tools. For safety reasons, these jobs are
best carried out at a Specialised Centre.
To Next Page
Loading...
Need help?
General
