7
-
in the indicated order.
-
ner.
fasteners into place.
3.3 FITTING THE SEAT (Fig. 3.3)
3.4 MOUNTING THE FRONT BUMPER
(if provided)
• Bumper Type “I” (Fig. 3.4)
• Bumper Type “Il” (Fig. 3.5)
3.5 ASSEMBLY AND CONNECTING
THE BATTERY (Fig. 3.6 - 3.7)
is in place.
IMPORTANT Always fully charge the bat-
tery according to the instructions in the battery
booklet.
IMPORTANT To prevent the safety device in
the electronic circuit board from cutting in, never
start the engine until the battery is fully charged!
4. CONTROLS AND INSTRUMENTS
4.1 STEERING WHEEL (Fig. 4.1 no.1)
4.2 THROTTLE LEVER (Fig. 4.1 no.2)
«CHOKE» cold start
for cold starts.
«FAST».
4.2a
(Fig. 4.1 no.2a)
4.3 KEY IGNITION SWITCH
(Fig. 4.1 no.3)
- On being released at the «START» position,
4.4 PARKING BRAKE (Fig. 4.1 no.4)
«A
«B
position «A».
To Next Page
Loading...
