Do you have a question about the Stiga PARK COMPACT and is the answer not in the manual?
Fuel | Petrol |
---|---|
Cutting height | 25-85 mm |
Drive | Rear-wheel drive |
Engine type | 4-stroke OHV |
Power | 7.1 kW |
Cutting width | 85 cm |
Steering | Articulated |
Explains symbols and safety warnings used on the machine.
Lists the different designations for Park Compact models.
Explains how figures and headings are referenced in the manual.
Describes the transmission systems for Man, HST, and 4WD models.
Explains the articulated steering system of the machine.
Details the electrical safety system and its importance for safe operation.
Introduces and describes the various control elements of the machine.
Outlines the approved uses and required STIGA accessories for the machine.
Outlines essential checks for fuel, oil, and safety before operating the machine.
Step-by-step instructions for starting the engine from cold or warm.
Provides advice for safe and optimal operation, including on slopes.
Instructions for safely stopping the engine and securing the machine.
Details the recommended service schedule for optimal performance and longevity.
Steps to prepare the machine safely for maintenance tasks.
Specifies the correct air pressure for front and rear tyres.
Procedure for changing engine oil, including intervals and oil type.
Instructions for checking, draining, and refilling 4WD transmission oil and filter.
Guidance on checking and adjusting the steering mechanism for clearance.
Instructions for checking belt transmissions for intactness and damage.
Information on battery maintenance, charging via engine, and general care.
Details on charging the battery with a charger, removal, installation, and cleaning.
Procedure for cleaning/replacing the air filter and cleaning the air intake.
Guidance on spark plug replacement and component lubrication points.
Guidance on checking and replacing the fuse in case of electrical faults.
Lists patent and design registrations covering the machine.