Stiga PARK PRO 340 IX User Manual

PARK PRO 340 IX
2016-2020
WORKSHOP MANUAL

Stiga PARK PRO 340 IX Specifications

General

Fuel	Petrol
Transmission	Hydrostatic
Drive	4WD
Cutting Height	25-90 mm
Cutting Height Adjustment	Electric
Cutting Height Range	25-90 mm
Warranty	2 years
Engine	Briggs & Stratton
Engine Type	4-stroke
Engine Displacement	570 cc

Summary

General Instructions

Introduction

General information about the manual, symbols, safety, and how to read it.

Warranty

Details warranty terms, exceptions, and procedures for claims and repairs.

Identification

Explains how to identify the machine, transmission, and engine using labels.

Unpacking and Assembly

Covers initial unpacking, assembly steps, and battery installation.

Maintenance

Outlines the maintenance schedule, points for checks, and lubrication.

Technical Data

Provides machine dimensions and general tightening torques for screws.

Frame and Safety Guards

Rear Wheels

Instructions for hub adjustment and wheel installation.

Lubrication

Details lubrication points and procedures for various machine parts.

Safety Guards and Tank Removal

Procedures for removing safety guards and the fuel tank.

Steering Wheel

Description

Explains the mechanical and hydraulic steering systems.

Steering Cable

Covers assembly and adjustment procedures for the steering cable.

Troubleshooting

Provides solutions for common steering system problems.

Hydraulic System

Safety

Safety precautions for working with the hydraulic system.

Configuration

Illustrates the physical layout of hydraulic components.

Hydraulic Diagram

Shows the detailed hydraulic system diagram.

Transmission Unit

Lists components and describes the operation of the transmission unit.

Hydraulic Power Steering and Equipment Lift

Details components and operating descriptions of steering and lift systems.

Troubleshooting

Provides solutions for common hydraulic system problems.

Auxiliary Hydraulic Circuit Adjustment/Control

Describes adjustment procedures for steering and lift systems.

Transmission Fluid

Covers fluid checks, top-ups, changes, and filter replacement.

Hydraulic Pump Replacement

Step-by-step guide for hydraulic pump disassembly and reassembly.

Belts

Theory on the Use of Belts

Explains the importance of using genuine belts and their specifications.

Arrangement of Belts on the Machine

Illustrates the routing and connections of the belt system.

Replacing Belts

Provides instructions for replacing different belts (A, B, C, D).

Control Cables

Description

Explains the construction and function of control cables.

Angle Ball Joints

Covers disassembly, assembly, and adjustment of angle ball joints.

Accelerator Cable

Details disassembly, assembly, and adjustment of the accelerator cable.

Choke Cable

Details disassembly, assembly, and adjustment of the choke cable.

HST Control Cable

Details disassembly, assembly, and adjustment of the HST control cable.

Parking Brake Cable and Belt "C" Tensioner Control Cable

Covers disassembly of parking brake and tensioner control cables.

Adjusting Parking Brake Cable and Belt "C" Tensioner Control Cable

Procedures for adjusting parking brake and tensioner control cables.

Test Drive

Procedures for testing machine operation after adjustments.

Electrical System

Description

Details the machine's electrical system, wiring, and components.

Troubleshooting

Provides troubleshooting procedures for electrical faults.

Electronic Board

Describes the electronic board and its connectors.

Electrical Safety Check

Outlines safety checks for machine start-up and mowing.

Hermetic Battery Care and Maintenance

Provides guidelines for battery care, charging, and maintenance.

Board Replacement

Step-by-step guide for replacing the electronic board.

Diagnostic Tool

Explains the use of the diagnostic tool for software updates and data access.

Check and Replace Main Power Cord

Instructions for checking and replacing the main power cord.