To Next PageTo Next Page
Need help?Do you have a question about the Stiga Park series 2WD and is the answer not in the manual?
General| Brand | Stiga |
|---|---|
| Model | Park series 2WD |
| Category | Lawn Mower |
| Language | English |
Details manual's sections, figures, tables, headings, and subheadings.
Explanation of symbols used for warnings, prohibitions, and notes.
Instructions for keeping the manual legible and accessible.
Details of the machine's rear-wheel drive, hydrostatic transmission, and differential.
Machine's purpose for mowing grass and suitability for non-professional operators.
Details dangerous or damaging uses of the machine, voiding warranty.
Explains the meaning of various safety signs and decals found on the machine.
Details found on the machine's identification label, including model and serial numbers.
Lists and identifies the main parts of the machine, illustrated in figures.
Emphasizes reading instructions, understanding controls, and learning to stop the machine.
Guidelines on wearing appropriate attire and inspecting the work area before operation.
Warnings on ventilation, exhaust gases, slopes, obstacles, and general machine handling.
Procedures for cleaning, maintenance, and storing the machine safely.
Instructions for safely transporting the machine using ramps and securing it.
Guidelines for responsible disposal of waste and avoiding environmental disturbance.
Lists components included in the packaging for machine assembly.
Instructions for opening and installing the machine's bonnet.
Procedures for installing and charging the machine's battery, including acid safety.
Steps for installing the seat, including screw tightening and folding.
Controls the accessory lift system for transport and operating positions.
Engages and disengages the parking brake, with two positions for operation.
Locks the parking brake pedal in the applied position for slopes or transport.
Determines gearing ratio and speed, also acts as service brake.
Instructions for adjusting the steering wheel height for operator comfort.
Regulates engine speed, choke usage for starting, and idling.
Details the ignition block for starting and stopping the engine, and key positions.
Engages/disengages PTO for activating front-mounted accessories, with safety warnings.
Essential checks before operation, including oil level and safe operation on slopes.
Refers to a table for correct accessory combinations.
Instructions for using lead-free petrol, tank capacity, and safe refuelling practices.
Procedure for checking and topping up engine oil using the dipstick.
Checks to perform before and during operation to ensure safety and correct machine function.
Step-by-step guide for starting and operating the machine, including warm and cold starts.
Procedure for safely stopping the engine and engaging the parking brake.
Instructions for cleaning the machine, including cooling air intake and water usage.
Guidance on adjusting cutting height for optimal results, especially with long or uneven grass.
Information on the GGP servicing programme and authorised workshops.
Ensures machine is stationary and engine is off before performing any maintenance.
Summary of maintenance tasks, frequency, and reference figures for keeping the machine in order.
Instructions for adjusting tyre pressure according to technical data.
Procedure for checking, topping up, and changing engine oil.
Ensures drive belts are intact and in good condition.
Procedures for checking steering for play and adjusting steering chains.
Information on battery charging methods and precautions for handling battery acid.
Details lubrication points and procedures for various machine components.
Precautions before servicing and advice on using genuine GGP spare parts.
Guides users through diagnosing and resolving common issues with the starter, engine, cutting, and vibrations.
