Need help?Do you have a question about the Stiga ROUTE 200-S and is the answer not in the manual?
Loosen the quick release collar as shown in figure A1 for fork adjustment.
Pull the release lever (figure A2) and position the front fork into an upright position.
Relocate release lever (B1), tighten screw (B2), and secure quick release collar (C1).
Insert screws into handlebar holes (D1), push down, and tighten nuts firmly (D2).
Adjust handlebar height (E1) to locked position and tighten quick release collar (E2).
Rotate wheels and bearings for proper function; lubricate if needed after two weeks.
Remove axle bolts, slide off worn wheels, replace with new ones, and tighten securely.
Discontinue use if self-locking nuts/fixings lose effectiveness; seek replacements.
Store the product indoors or under a roof to protect it from elements.
To Next Page
General
