4
EN
SERVICE
technician.
nearest AUTHORISED SERVICE CENTRE for repair.
When servicing, use only identical replacement parts.
WARNING
We recommend Wide Vision Safety Mask for use
3. TECHNICAL DATA
Voltage 43.2 Volt DC
No load speed 6500/min Max
Cutting head Bump feed/Brush0cutter Blade
Cutting Line Diameter 2.0mm
Cutting Path Diameter 356mm/254mm
Features of bump feed/Brush- cutter Blade
Max speed 10000rpm/4 teeth/
max speed 1000rpm
Max 6.4kg
Measuered sound pressure level L
PA=81 dB(A), KPA=3 dB(A)
LWA=93.5 dB(A), KPA=3 dB(A)
L
WA=96 dB(A)
Vibration 4.0m/s
2
,k=1.5m/s
2
Brush Cutter
Measuered sound pressure level L
PA=82 dB(A), KPA=3 dB(A)
L
WA=95.2 dB(A), KPA=3 dB(A)
L
WA=100 dB(A)
Vibration 3.0m/s
2
, k=1.5m/s
2
4. DESCRIPTION
1. Battery pack
3. Rear handle
9.Front handle
11.Grass deflector
13.Blade
2. Battery charger
4.Lock-off button
8. Lock latch
10.Couple
12.Trimmer head
14. Cut-off Blade
15. EC Conformity marking
16. Name and address of the manufacturer
EC
18. Article Code
19. Machine model
20. Serial number
21. Year of manufacture
SPECIFICATIONS/DESCRIPTION
The example of the conformity declaration is found in the penultimate page of the manual.
ANNEX E ANNEX D
NOTE: THE DECLARED VIBRATION TOTAL VALUE HAS BEEN MEASURED IN ACCORDANCE WITH A STANDARD
TEST METHOD AND MAY BE USED FOR COMPARING ONE TOOL WITH ANOTHER; THE DECLARED VIBRATION
TOTAL VALUE MAY ALSO BE USED IN A PRELIMINARY ASSESSMENT OF EXPOSURE.
WARNING:
THE VIBRATION EMISSION DURING ACTUAL USE OF THE POWER TOOL CAN DIFFER FROM THE DECLARED
TOTAL VALUE DEPENDING ON THE WAYS IN WHICH THE TOOL IS USED; AVOID VIBRATION RISK SUGGESTION:
WEAR GLOVE DURING OPERATION LIMIT OPERATING TIME AND SHORTEN TRIGGER TIME.
To Next Page
Loading...
Need help?
General
