Stihl BG 55 - Removing the Blower Tube; Assembling the Vacuum Shredder; Fitting the Elbow

BG 55, BG 65, BG 85, SH 55, SH 85
English
12
N Push the nozzle (4) onto the blower
tube (1) as far as lug (5),
position (a) (long) or position (b)
(short), and rotate the nozzle in the
direction of the arrow to it lock in
position.
Removing the Blower Tube
N Use a suitable tool to lift the tab (6)
on the fan housing stub (3).
N Rotate the blower tube in the
direction of the arrow and then pull it
out.
See "Assembling the Vacuum Shredder"
for installation and removal of the
vacuum attachment.
The vacuum attachment is available as
a special accessory.
Fitting the Elbow
N From inside the catcher bag (2),
push the elbow (1) through the
intake opening and pull it outwards
until it is firmly seated.
N Attach the carrying strap.
1
5
4
295BA004 KN
a
b
6
295BA005 KN
3
Assembling the Vacuum
Shredder
1
2
295BA006 KN