Stihl BR 450 - Starting; Stopping the Engine; As soon as the engine runs; Stopping the Engine; Other Hints on Starting

BR 450, BR 450 C
English
20
N Make sure you have a firm footing:
Hold the unit with your left hand on
the carrying handle and grip the
control handle with your right hand.
Alternative:
N Place the unit securely on the
ground and make sure that
bystanders and loose objects are
well clear of the nozzle outlet.
N Slide the starter switch downwards.
N Press the starter switch
As soon as the engine runs
N Operate the throttle trigger (2).
N Choke knob automatically returns to
the run position e when the throttle
trigger is operated.
At very low outside temperatures
N Open throttle slightly – warm up the
engine for a short period.
Stopping the Engine
N Move the setting lever to 0 – the
engine stops – the setting lever
springs back to the on position.
Other Hints on Starting
Electric starter does not operate
N Temperature below 0°C, electric
starter is deactivated - start engine
manually.
N Low electric starter battery - start
engine manually.
Engine stalls in cold start position c or
under acceleration
N Move the choke knob to o and
continue cranking until the engine
runs.
Engine does not start in warm start
position o
N Move the choke knob to c and
continue cranking until the engine
runs.
If the engine does not start
N Check that all settings are correct.
N Check that there is fuel in the tank
and refuel if necessary.
0014BA004 AS0014BA002 AS
12
2
0416BA012 KN
0009BA017 KN
0416BA016 KN
Downloaded from ManualsNet.com search engine