BT 130
English
22
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Auger brake
Check operation XX
Have serviced by dealer
1)
X
Control handle Check operation XX
Air filter Replace XX
Pickup body in fuel tank
Have checked by servicing dealer
1)
X
Have replaced by servicing dealer
1)
XX
Fuel tank Clean X
Carburetor
Check idle adjustment – drilling spindle
must not rotate
X
Readjust idle X
Spark plug
Readjust electrode gap X
Replace after every 100 operating hours
Spark arrestor in muffler
Have checked by servicing dealer
1)
X
Have cleaned or replaced by servicing
dealer
1)
XX
All accessible screws and nuts (not adjust-
ing screws)
Retighten X
Antivibration elements
Check XXX
Have replaced by servicing dealer
1)
X
Gearbox Re-lubricate X
To Next Page
Loading...
