21FCS-KM
English / USA
4. Stub Shaft (drive tube)
Connects the powerhead to the
gearbox.
5. Depth Wheel
Deflector-mounted depth wheel
rolls on ground and keeps edger
blade at preset height for required
depth of cut.
6. Wingnut
Must be loosened to change
position depth wheel.
7. Gearbox Wheel
Gearbox-mounted wheel designed
to protect the gearbox housing from
wear.
8. Gearbox
Reduces engine speed to speed
required to drive the edger blade.
9. Screw Plug
Seals filler opening for gearbox
grease.
10. Wear Guard
Protects the gearbox from wear.
11. Skirt
Designed to reduce the risk of injury
from foreign objects flung back
towards the operator by the blade.
Engine
See CombiEngine instruction manual.
Weight
5.95 lb (2.7 kg)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Specifications Special Accessories
To Next Page
Loading...
Need help?
General
