Stihl HLA 65 User Manual

HLA 65
English
21
The type of harness is market-specific.
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
Attach the machine to the shoulder
strap.
N Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
Detaching machine from shoulder strap
N Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
The battery is given a charge of about
30% before leaving the factory.
Recommendation: Fully charge the
battery before using your power tool for
the first time.
N If necessary, remove the cover from
the battery compartment before
fitting the battery, i.e. depress both
locking tabs to unlock and remove
the cover.
Fitting the Battery
N Insert the battery (1) in the power
tool – the battery slides into the
compartment – press it down
carefully until it snaps into position –
the battery must be flush with the
top of the housing.
Switching on the Machine
Your machine cannot be switch on while
it is in the transport position.
N Make sure you have a secure and
balanced footing.
N Stand upright – hold the power tool
in a relaxed position.
Fitting the Harness
1
2
4866BA017 KN
1
002BA320 KN
2
1
2
1
002BA321 KN
2
1
2
Switching On
1
3905BA011 KN

Stihl HLA 65 Specifications

General

Brand	Stihl
Model	HLA 65
Category	Trimmer
Language	English