Stihl HLA 65 User Manual

HLA 65
English
25
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Always set the locking lever to
ƒ and remove the battery before starting any work
on the machine.
before starting work at the end of work and/or daily weekly monthly yearly if faulty if damaged as required
Complete machine
visual inspection (condition) X
clean X
Control handles (locking lever, trigger
switch lockout and trigger switch)
Checking operation X
clean XX
Intake port for cooling air
visual inspection X
clean X
All accessible screws, nuts and bolts retighten X
Battery visual inspection XXX
Battery compartment
clean XX
Check operation (battery ejection) XX
Cutting blades
visual inspection XXX
clean
1)
X
sharpen XX
Gearbox and con-rod
inspection by a specialist dealer after
every 50 hours of operation
2)
topping up of STIHL gear lubricant by a
specialist dealer after every 50 hours of
operation
2)
Safety information labels replace X
1)
Afterwards spray the blades with STIHL resin solvent
2)
STIHL recommends STIHL servicing dealers

Stihl HLA 65 Specifications

General

Brand	Stihl
Model	HLA 65
Category	Trimmer
Language	English