Stihl KM 130 R User Manual

32
English / USA
KM 110, KM 130
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Single Cylinder Four-Stroke
Engine with Gasoil Lubrication
Displacement
KM 110: 1.92 cu.in (31.4 cm
3
)
KM 130: 2.22 cu.in (36.3 cm
3
)
Bore
KM 110: 1.57 in (40 mm)
KM 130: 1.69 in (43 mm)
Stroke
KM 110: 0.98 in (25 mm)
KM 130: 0.98 in (25 mm)
Power according to ISO 8893:
KM 110: 1.34 bhp (1,0 kW)
at 7000 rpm (1/min)
KM 130: 1.90 bhp (1,4 kW)
at 8500 rpm (1/min)
Idle speed
2,800 rpm (1/min)
Engine cutoff speed
10,500 rpm (1/min)
Valve clearance
Inlet valve: 0.004 in (0.10 mm)
Exhaust valve: 0.004 in (0.10 mm)
Fuel tank capacity
18.0 fl.oz (0.53 l)
Spark plug (resistor type)
KM 110: Bosch USR7AC
Electrode gap 0.02 in (0.5 mm)
KM 130: NGK CMR6H
Electrode gap 0.028 in (0.7 mm)
Weight
(without tool and deflector)
KM 110 R
with loop handle: 10.0 lb (4.55 kg)
KM 130 R
with loop handle: 10.14 lb (4.60 kg)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Specifications Special Accessories

Stihl KM 130 R Specifications

General

Engine Type	4-MIX
Displacement	36.3 cc
Power Output	1.4 kW
Sound Pressure Level	96 dB(A)
Sound Power Level	109 dB(A)
Engine Power	1.9 bhp
Emissions	EPA Phase II, CARB standards
Recommended Cutting Attachment	Grass blade, brush knife