Stihl KM130 User Manual

SAFETY PRECAUTIONS & WORKING TECHNIQUES
MAINTENANCE
STARTING & STOPPING THE ENGINE
SAFETY PRECAUTIONS & WORKING TECHNIQUES
USING THE UNIT
CHECKING & TENSIONING THE CHAIN
FILLING CHAIN OIL TANK
Stihl KM130 Combi Engine
Supplied by Centenary Hire. Ph: (07) 3375 5068
QUICK REFERENCE TO THE
STIHL COMBI ENGINE INSTRUCTION MANUAL
(Not all topics covered)
READ INSTRUCTION MANUAL BEFORE USE


 GENERAL SAFETY
Refer to Instruction manual page 3.
Special safety precautions must be observed when
working with a power tool.
It is important that you read and understand both
instruction manuals (Combi Engine & Combi Tool)
before using the unit for the first time. Keep the
manuals in a safe place for future reference. Non-
observance of the safety precautions in the instruction
manuals may cause serious or even fatal injury.


 CLOTHING & EQUIPMENT
Refer to Instruction manual page 4.


 TRANSPORTING THE MACHINE
Refer to Instruction manual page 4.


 FUELING
Refer to Instruction manual page 5.
Gasoline is an
extremely flammable
fuel.


 BEFORE STARTING
Refer to Instruction manual page 5.


 STARTING THE ENGINE
Refer to Instruction manual page 6.


 DURING OPERATION
Refer to Instruction manual page 6.
Toxic fumes can kill!


 VIBRATIONS
Refer to Instruction manual page 7.
Refer to Instruction Manual page 16.
Stihl HT-KM Pole Pruner
Supplied by Centenary Hire. Ph: (07) 3375 5068
QUICK REFERENCE TO THE
STIHL POLE PRUNER INSTRUCTION MANUAL
(Not all topics covered)
READ INSTRUCTION MANUAL BEFORE USE


 HOLDING & CONTROLLING THE POWER TOOL
Refer to Instruction manual page 36.


 DURING OPERATION
Refer to Instruction manual page 36.
This power tool is not insulated against
electric shock. To reduce the risks of
electrocution maintain a minimum
clearance of 15m from electric powerlines.


 LIMBING
Refer to Instruction manual page 37.


 CUTTING SEQUENCE
Refer to Instruction Manual page 39.


 CROSS-CUT
Refer to Instruction manual page 40.


 RELIEVING CUT
Refer to Instruction manual page 40.


 FLUSH CUTTING THICK BRANCHES
Refer to Instruction manual page 40.
Refer to Instruction manual page 42 & 43.
Refer to Instruction manual page 43.
Do not attempt any maintenance or repair work except tensioning
the saw chain. All other work to be performed by Centenary Hire
or by a person trained in the maintenance of STIHL chainsaws.
Please refer to the reverse side of this sheet for further
information about maintenance of the chainsaw during the course
of the hire.

Stihl KM130 Specifications

General

Brand	Stihl
Model	KM130
Category	Lawn and Garden Equipment
Language	English

Summary

Stihl KM130 Combi Engine Quick Reference

General Safety Precautions

Special safety precautions must be observed when working with a power tool.

Clothing and Equipment

Refer to Instruction manual page 4 for required clothing and equipment.

Transporting the Machine

Instructions for safely transporting the machine are on page 4 of the manual.

Fueling Safety

Information about fueling, noting gasoline is extremely flammable.

Before Starting Procedures

Refer to Instruction manual page 5 for pre-start checks and procedures.

Starting the Engine

Refer to Instruction manual page 6 for instructions on starting the engine.

Operation Safety Warnings

Safety warning regarding toxic fumes during operation.

Vibration Information

Information on vibrations and their effects, refer to page 7.

Starting and Stopping the Engine

Refer to Instruction Manual page 16 for engine start and stop procedures.

Stihl HT-KM Pole Pruner Quick Reference

Pole Pruner Safety & Techniques

General safety precautions and working techniques for the pole pruner.

Holding and Controlling Tool

Guidance on how to hold and control the power tool safely.

Pole Pruner Operation

Refer to Instruction manual page 36 for safe operation procedures.

Limbing Procedures

Refer to Instruction manual page 37 for limbing techniques.

Using the Pole Pruner Unit

Information on using the pole pruner unit and related procedures.

Cutting Sequence

Refer to Instruction Manual page 39 for the correct cutting sequence.

Cross-Cut Technique

Refer to Instruction manual page 40 for cross-cutting instructions.

Relieving Cut Technique

Refer to Instruction manual page 40 for relieving cut procedures.

Flush Cutting Thick Branches

Refer to Instruction manual page 40 for flush cutting thick branches.

Chain Checking and Tensioning

Refer to Instruction manual pages 42 & 43 for chain checking and tensioning.

Filling Chain Oil Tank

Refer to Instruction manual page 43 for instructions on filling the chain oil tank.

Pole Pruner Maintenance

Information regarding maintenance, excluding saw chain tensioning.

Chainsaw Hire & Performance Expectations

Fuel and Chain Oil

Details on provided fuel and chain oil, and importance of using specified types.

Chainsaw Chain Sharpness

Information on chain sharpness, factors affecting it, and inspection.

Factors Affecting Chain Dullness

Details on wood types, contact with dirt, and insufficient chain oil.

Maintenance During Hire

Procedure for returning the chainsaw for maintenance, excluding chain tensioning.

Replacing Chain Due to Bluntness

Information on replacing a blunt chain, with notes on first replacement cost.

Replacing Starter Rope

Guidance on replacing the starter rope if it becomes broken.