To Next PageTo Next Page
Need help?Do you have a question about the Stihl MM 56 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 27.2 cc |
| Engine | STIHL 2-MIX engine |
| Handle Type | Loop handle |
| Fuel Capacity | 0.34 l (11.5 oz) |
| Power Output | 0.8 kW |
| Recommended Cutting Diameter | N/A (depends on attachment) |
Explains pictograms attached to or embossed on the machine.
Explains how operating and safety instructions are supported by illustrations and text symbols.
Explains STIHL's philosophy of continuous product improvement and potential manual updates.
Details the physical and mental condition required for safe operation.
Emphasizes the need for good physical and mental health and avoiding fatigue.
Discusses the power tool itself, modifications, and condition checks.
Covers general usage aspects and safe operation.
Details safe practices for fueling the machine.
Explains how to prevent hazardous fuel spraying during fueling.
Provides instructions on safely removing the fuel filler cap.
Provides instructions on properly installing the fuel filler cap.
Explains how to adjust the bicycle handle for proper working position.
Provides additional tips and common issues when starting the engine.
Details how to hold and control the power tool firmly with both hands.
Provides instructions for operating the power tool.
Covers maintenance, repair, and storage procedures for the unit.
Recommends STIHL MotoMix for its high octane and correct mix ratio.
Advises on mixing only sufficient fuel for a few days and proper storage.
Provides detailed instructions and safety precautions for fueling the machine.
Illustrates and describes the process of opening the fuel tank cap.
Instructions on how to refuel the machine, including air space.
Identifies and describes the main controls for starting and stopping.
Step-by-step guide on how to start the engine.
Instructions for starting a warm engine.
Provides additional tips and common issues when starting the engine.
Addresses engine stalling issues during cold starts or acceleration.
Step-by-step guide on how to stop the engine safely.
Details the process of attaching additional weight to the MultiEngine.
Details the process of installing wheels on the MultiEngine.
Describes how to fold the wheels in and out for storage or use.
Guidance for operating the machine during its break-in period.
Instructions for operating the machine after the break-in period.
Details how to adjust the idle speed of the engine.
Step-by-step guide on how to remove the spark plug.
Specifies the duration of the warranty period for the engine.
Explains the diagnostic process for warranty claims.
Explains what STIHL Incorporated warrants regarding emissions regulations.
Lists specific parts covered under the emission-related warranty.
Lists registered trademarks of STIHL, including color combinations.
Lists common law trademarks used by STIHL.
Lists various STIHL product and technology trademarks.
