Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2020
0458-489-8621-A. VA2.B20.
0000007928_003_GB
MM 56 C
English
1
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
the manuals of the MultiEngine and the
MultiTool to operate your power tool.
To receive maximum performance and
satisfaction from your STIHL power tool,
it is important that you read, understand
and follow the safety precautions and
the operating and maintenance
instructions in chapter "Safety
Precautions and Working Techniques"
before using your power tool. For further
information you can go to
www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in the
two manuals.
WARNING
Because this MultiEngine is the engine
for a high-speed power tool, some
special safety precautions must be
observed to reduce the risk of personal
injury. Careless or improper use may
cause serious or even fatal injury.
Make sure your unit is equipped with the
proper deflector for the type of cutting
attachment being used. Always wear
proper eye protection.
MultiSystem 2
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Approved MultiTools 11
Adjusting the bicycle handle 11
Fuel 12
Fueling 13
Starting / Stopping the Engine 15
Extra weight 17
Wheels 18
Operating Instructions 19
Replacing the Air Filter 19
Engine Management 19
Adjusting the Carburetor 20
Spark Arresting Screen in Muffler 20
Spark Plug 20
Engine Running Behavior 21
Storing the Machine 22
Maintenance and Care 23
Main Parts 24
Specifications 25
Maintenance and Repairs 26
Disposal 26
Limited Warranty 27
STIHL Incorporated Federal
Emission Control Warranty
Statement 27
Trademarks 29
To Next Page
Loading...
