To Next PageTo Next Page
Need help?Do you have a question about the Stihl FS 56 C-E and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Displacement | 27.2 cc (1.66 cu. in.) |
| Fuel Tank Capacity | 0.33 l (11.2 oz.) |
| Start System | Easy2Start |
| Power Output | 0.8 kW (1.1 bhp) |
Explains symbols attached to or embossed on the machine.
Explains how text instructions are marked with symbols.
STIHL's philosophy of continuous product improvement.
Essential safety measures to reduce risk of injury.
User's duty to read, understand, and follow safety.
Requirements for the operator's physical and mental condition.
Specific physical and mental health requirements for safe operation.
Guidelines for appropriate attire to ensure safety during operation.
Importance of wearing sound barriers to protect hearing from noise.
Recommends gloves and sturdy clothing for grip and protection.
Emphasizes good footing and general tool operation advice.
Safety advice for carrying the power tool.
Steps and precautions for safely refueling the machine.
Warnings about gasoline flammability and handling.
Instructions to check the power tool's condition before starting.
Warnings regarding proper installation and condition of cutting attachments.
Importance of securing the spark plug boot to prevent fire.
Instructions on how to start the engine safely.
Guidance on idle speed adjustment for safe operation.
How to properly hold and control the machine during use.
Guidelines for operating in well-ventilated areas and good visibility.
Explains kickout and how to avoid it.
Regular checks for tightness and condition of the cutting attachment.
Procedures for clearing clogged or stuck cutting attachments safely.
Warnings about hot mufflers and catalytic converter safety.
Instructions for using mowing heads and adjusting line length.
Warnings on PolyCut wear limits and metal blade use.
Explains kickout risk with rigid blades.
How to use grass cutting blades effectively and safely.
General guidelines for maintaining, repairing the machine.
Warnings on using correct spark plugs and secure boot connection.
Warnings about muffler damage, modification, and spark arrestors.
Table showing correct combinations for safety and performance.
Step-by-step guide to installing the bike handle.
How to align and secure the handlebar for optimal control.
Instructions for attaching the control handle to the handlebar.
Instructions for connecting the throttle cable.
Instructions for installing the loop handle.
Guide for attaching the barrier bar for user safety.
How to adjust the loop handle for operator comfort and control.
Instructions for attaching the carrying ring to the drive tube.
Guidance on selecting and installing the correct deflector.
Steps to prepare the machine before attaching cutting tools.
How to install the thrust plate onto the shaft.
Steps for securely attaching mowing heads to the shaft.
Procedure for safely detaching mowing heads.
How to adjust nylon line length for different mowing heads.
Instructions for safely mounting metal cutting blades.
Details on required gasoline and oil mix ratio for the engine.
Precautions for handling gasoline safely to prevent fire.
Steps to prepare for fueling and information on filler caps.
How to open the toolless filler cap with a folding grip.
How to ensure the toolless filler cap is properly sealed.
Troubleshooting steps for misaligned or improperly fitting caps.
Instructions for opening and closing the threaded filler cap.
General advice on refueling carefully to avoid spills.
How to properly wear and adjust the shoulder strap harness.
How to wear and adjust the full harness for balanced operation.
Steps to adjust the unit's balance for proper control.
Identification and function of engine start/stop controls.
Explanation of how the stop switch and ignition system operate.
Procedure for starting a cold engine using the choke.
Procedure for starting a warm engine without full choke.
Correct technique for pulling the starter grip safely.
Guidelines for the initial break-in period to ensure engine longevity.
Advice on running the engine after prolonged high-throttle use.
Steps for proper shutdown and short-term storage.
Steps for cleaning or replacing the air filter element.
How exhaust emissions are controlled by engine design.
Factory settings for optimal fuel-air mixture.
How to adjust idle speed so the cutting tool does not turn.
Steps for removing, checking, and installing the spark plug.
Crucial safety warnings regarding spark plug installation and arcing.
What to do if engine performance is unsatisfactory.
Tips for prolonging the life of the starter rope.
Procedures for preparing and storing the machine for extended periods.
How to sharpen dull cutting attachments using files or grinders.
Checking the spark arresting screen in the muffler for performance issues.
Table outlining maintenance tasks and intervals.
Diagram and list identifying all major parts of the machine.
Explanations of key terms and components used in the manual.
Technical details of the engine, including displacement and power.
Details on ignition, fuel systems, and machine weight.
How to get information on available special accessories.
Guidelines for performing maintenance and authorized repair procedures.
Explains the user's and STIHL's warranty rights and responsibilities.
User's duty to perform required maintenance for warranty validity.
Specific warranty details for California regarding emissions control.
Details on warranty duration and what is covered by STIHL.
List of STIHL's registered trademarks and color schemes.
