To Next PageTo Next Page
Need help?Do you have a question about the Stihl FS 40 C-E and is the answer not in the manual?
General| Engine Displacement | 27.2 cc |
|---|---|
| Fuel Tank Capacity | 0.33 l |
| Shaft Type | Straight |
| Sound Pressure Level | 94 dB(A) |
| Vibration Levels Left/Right | 4.5/4.5 m/s² |
| Engine Type | 2-stroke |
| Power Output | 0.8 kW |
| Weight | 4.4 kg |
Explains symbols used in the manual.
Explains text symbols and signal words used in the manual.
Information on STIHL's product improvement process.
Outlines operator responsibilities for safe use of the machine.
Details physical and mental requirements for operating the machine.
Warns about risks from fatigue and prolonged vibration exposure.
Alerts users with pacemakers to potential electromagnetic interference.
Details essential protective clothing and eye protection for safe operation.
Emphasizes hearing protection and importance of good footing.
Advises against modifying the tool and stresses proper handling.
Safety guidelines for transporting the machine and handling fuel.
Step-by-step refueling procedures and fuel cap security.
Instructions for checking fuel cap tightness and proper closure.
Outlines critical checks before operating the machine.
Safety warnings regarding cutting attachment and spark plug boot.
Step-by-step starting guide and warning against drop starting.
Safety precautions for using the starter grip and making adjustments.
Details crucial adjustments like idle speed for safe operation.
Warns about toxic exhaust fumes and chemical hazards during operation.
Guidelines for operating the machine and inspecting the work area.
Covers safe use, tightness, and condition of the cutting attachment.
Details safety for hot gearbox, muffler modification, and component condition.
Instructions for using cutting attachments and mowing heads.
Describes STIHL AutoCut and PolyCut mowing heads.
Information on STIHL FixCut mowing head and wear indicators.
Safety warnings related to spark plug and general maintenance.
Warnings about muffler condition and damaged cutting heads.
Warning against using a pressure washer for cleaning the machine.
Table and text explaining correct combinations of parts for safe use.
Lists available mowing heads and their compatibility.
Instructions for adjusting and mounting the loop handle.
Step-by-step guide for mounting the deflector.
Initial steps and components required for mounting attachments.
Guides for installing various mowing heads onto the trimmer.
Detailed steps for installing the STIHL AutoCut C 5-2 mowing head.
Detailed steps for installing the STIHL PolyCut 6-3 mowing head.
Procedure for blocking the drive shaft during maintenance.
Instructions for removing different types of mowing heads.
How to adjust the nylon line length during operation.
Procedures for replacing nylon line/blades and fuel requirements.
Details recommended fuel-oil mixture ratios and storage.
Steps to prepare for fueling, including cleaning the cap area.
Instructions for opening and closing the toolless fuel cap.
Refueling process and operation of the threaded filler cap.
How to ensure the fuel cap is properly closed and aligned.
Instructions for opening and closing the threaded filler cap.
Identification of controls and how the ignition system functions.
Step-by-step guide for starting the engine in cold and warm conditions.
How to use the starter grip for different models.
Final steps after engine starts and how to stop the engine.
Common starting issues and their solutions.
Guidelines for the engine break-in period and during normal operation.
Steps for cleaning or replacing the air filter when power is lost.
How engine parameters control exhaust emissions.
Initial and altitude-specific adjustments for the carburetor.
How to adjust idle speed to prevent cutting attachment rotation.
Troubleshooting carburetor idling issues like rotating attachment or poor acceleration.
Procedures for removing, checking, and replacing the spark plug.
How to diagnose unsatisfactory engine running behavior, possibly due to muffler.
Correct procedure for installing the spark plug and boot.
Tips to prolong the life of the starter rope.
Guidelines for storing the machine for short and long periods.
Steps to prepare for replacing nylon line in the STIHL AutoCut head.
Steps for assembling the mowing head after line replacement.
Detailed instructions on how to wind the nylon line onto the spool.
How to remove any remaining nylon line from the spool.
Instructions for winding new nylon line onto the spool.
How to check the spark arresting screen for power loss.
STIHL's recommendation for dealer servicing.
Table detailing maintenance tasks and their recommended intervals.
Maintenance schedule for the cutting attachment.
Procedure for replacing safety labels on the machine.
Illustrated identification of all major parts of the machine.
Explains the function of key machine components.
Information on emission compliance periods and standards.
Details about the single cylinder two-stroke engine.
Technical data for FS 40 and FS 40 C models.
Technical data for FS 50 and FS 50 C models.
Specifications on weight, length, ignition, and fuel system.
Information on available special accessories.
Procedures for maintenance and repair, emphasizing authorized service.
Details STIHL's federal warranty for emission control systems.
Explains manufacturer's warranty and owner's maintenance responsibilities.
Defines warranty duration and procedures for claiming defects.
Process for diagnosis and warranty repairs at authorized dealers.
Requirements for maintenance and limitations of the warranty.
Specific warranty statement for California emissions control systems.
Responsibilities of manufacturer and owner regarding California warranty.
Lists STIHL's registered trademarks.
Lists STIHL's common law trademarks.
