To Next PageTo Next Page
Need help?Do you have a question about the Stihl FS 90 and is the answer not in the manual?
General| Engine Displacement | 28.4 cc |
|---|---|
| Fuel Type | Gasoline |
| Handle Type | Loop handle |
| Shaft Type | Straight |
| Fuel Capacity | 0.53 l |
| Weight | 5.8 kg |
| Cutting Attachment | Autocut 25-2 |
| Engine Power | 0.95 kW (1.27 bhp) |
General safety for high-speed cutting tools, risk of serious injury.
Importance of reading, understanding, and dealer training for safe operation.
Covers physical/mental condition, fatigue, and vibration-related health risks.
Details requirements for protective clothing, eye, and hearing protection.
Guidelines for safe handling, control, and transport of the power tool.
Precautions for handling fuel, refueling procedures, and cap tightening.
Procedures and warnings for checking the tool's condition before starting operation.
Detailed steps for starting the engine and making important adjustments like idle speed.
Guidelines for controlling the tool during operation and working in safe conditions.
Addresses dust inhalation, operating instructions, and emergency engine shutdown.
Covers safety checks, attachment security, blade condition, and gearbox heat.
Table and warnings on selecting correct combinations for safe use.
Details the fuel mixture (gasoline and oil) for the 4-MIX engine.
Guides on preparing and storing fuel mixtures, including mixing ratios.
Instructions for properly closing the fuel filler cap to prevent spillage and fire.
Step-by-step instructions for safely opening the fuel filler cap.
Identifies controls and their positions for starting, running, and stopping the engine.
Detailed steps for starting the engine, including choke and throttle use.
Instructions on how to safely stop the engine.
Guidance on what to do if the engine does not start, including choke and spark plug checks.
Details the factory standard settings and initial adjustments for the carburetor.
Guidance on fine-tuning the carburetor based on altitude and performance.
How to adjust idle speed for smooth running and to prevent attachment rotation.
Guides on removing, cleaning, checking gap, and replacing the spark plug.
