To Next PageTo Next Page
Need help?Do you have a question about the Stihl FC 100 and is the answer not in the manual?
General| Brand | Stihl |
|---|---|
| Model | FC 100 |
| Category | Lawn and Garden Equipment |
| Language | English |
Explanation of graphical symbols used in the manual to enhance understanding of operations and warnings.
Details on text-based markers like bullets and numbered steps that guide the user through procedures.
Information on how different models may have varying features or optional accessories available.
Note on STIHL's continuous product improvement and potential differences from manual descriptions.
Requirements for the operator's physical and mental state, including avoiding fatigue and substances.
Guidelines for fueling in well-ventilated areas, handling fuel containers, and safe fueling practices.
Guidance on moving the wheel upwards or downwards to increase or reduce the cutting depth.
Warning against adjusting the deflector, as it's pre-set for safety and debris direction.
Guidance on holding and guiding the unit to ensure the blade remains vertical during cutting.
Advice to maintain consistent engine speed and avoid forcing the blade to ensure smooth operation.
Instruction to walk forwards and not pull the unit towards the operator during cutting.
Instructions on placing the loop handle on the drive tube forward of the control handle.
Procedure for fitting the clamp screw and nut to securely attach the loop handle.
Guidance on adjusting the throttle cable after the unit is fully assembled for proper function.
Steps for correctly installing the edger blade, including safety checks and securing procedures.
Correct placement of the blade on the thrust plate and securing it with the nut and washer.
Specification of unleaded gasoline and STIHL two-stroke engine oil mix ratio (50:1).
Guidance on using mid-grade gasoline with a minimum octane rating, and when to use premium fuel.
Instructions for mixing fuel, storage limits, and proper handling of fuel canisters.
Safety measures for reducing burn risks from escaping gas vapor when removing the fuel filler cap.
