To Next PageTo Next Page
Need help?Do you have a question about the Stihl FS 90 R and is the answer not in the manual?
General| Engine Displacement | 28.4 cc |
|---|---|
| Engine Type | 2-stroke |
| Sound Pressure Level | 95 dB(A) |
| Recommended Cutting Attachment | AutoCut 25-2 |
| Shaft Type | Straight |
| Starter | Recoil |
| Fuel Capacity | 530 cc (18 oz) |
| Fuel Type | Gasoline |
| Overall Length | 1, 800 mm |
| Engine Power | 0.95 kW / 1.3 bhp |
Explains symbols used on the machine and in the manual.
Explains how instructions and procedures are marked.
Notes on product updates and changes.
Essential protective apparel for safe operation.
Covers operator, tool, and usage for safe operation.
Guidelines for safe transportation of the power tool.
Procedures for safely filling the fuel tank.
Checks and preparations before operating the tool.
Steps for starting the engine safely.
How to hold and control the tool during use.
Optimal conditions for safe and effective operation.
General guidelines for using cutting attachments.
Explains kickout and how to avoid it.
Lists available cutting attachments and their types.
Lists available handle types for control.
Lists available harness types for support.
Lists attachments and their uses.
Procedures for safely filling the fuel tank.
Identifies main controls on the handlebar and drive tube.
Details of the control handle on the handlebar.
Explains the positions of the slide control.
Guidelines for operating a new machine.
Steps to clean the air filter for optimal performance.
How engine parameters are controlled.
Factory default settings for optimal fuel-air mixture.
Adjustments for altitude and conditions.
How to inspect the spark plug condition and gap.
Step-by-step guide to replacing the starter rope.
How to properly tension the rewind spring.
Checking and re-balancing cutting attachments after sharpening.
