Stihl FS 90 R - Control handle on handlebar

FS 90, FS 90 R
English
33
Hanging positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
N should rest lightly on the ground
Circular saw blades (B)
N should "hover" approx. 8 in. (20 cm)
above the ground
If the proper handing position has been
attained, then:
N Tighten the screw on the carrying
ring
Disconnecting the machine from the
harness
N Press the spring on the snap
hook (1) and remove the carrying
ring (2) from the hook
Controls
Control handle on handlebar
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
A
002BA034 KN
B
002BA035 KN
Starting / Stopping the
Engine
3
STOP
56
4
7
002BA182 KN
1
2
START
STOP-