Stihl KM 94 R User Manual

KM 94 R
English
25
Ignition System
Electronic magneto ignition
Fuel System
All position rotary valve carburetor with
integral fuel pump
Weight
Features
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
Displacement: 24.1 cc
(1.47 cu.in)
Bore: 35 mm
(1.378 in)
Stroke: 25 mm
(0.984 in)
Engine power to
ISO 8893:
0.9 kW (1.2 bhp)
at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 9,800 rpm
Max. torque / engine
speed:
1.3 Nm
(12 lbf.in) at
5,000 rpm
Spark plug (resistor
type): NGK CMR 6 H
Electrode gap: 0.5 mm
(0.020 in)
Fuel tank capacity: 540 cc
(18.3 fl.oz)
dry, without KombiTool
KM 94 R: 4.0 kg (8.8 lbs)
R Loop handle
Z Fireproof equipment
Maintenance and Repairs

Stihl KM 94 R Specifications

General

Displacement	27.2 cm³
Power Output	0.9 kW
Weight	4.0 kg
Engine Type	2-stroke
Fuel Tank Capacity	0.35 l
Engine Power	0.9 kW
Powerhead Weight	4.0 kg
Fuel Capacity	0.54 l