Stihl MS362C-M User Manual

MS 362 C-M
English
48
Maintenance and Care
The following information applies in normal operating conditions. The specified inter
-
vals must be shortened accordingly when working for longer than normal or under
difficult cutting conditions (extensive dust, highly resinous lumber, lumber from trop
-
ical trees, etc.). If the machine is only used occasionally, the intervals can be
extended accordingly.
Before starting work At the end of work and/or daily Whenever tank is refilled Weekly Monthly Yearly If faulty If damaged As required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Throttle trigger, throttle trigger lockout,
choke lever, choke control, stop switch,
master control lever (dependent on
equipment)
Function tests XX
Chain brake
Function tests XX
Have checked by a specialist dealer
1)
X
Manual fuel pump (if present)
Check X
Have repaired by a specialist dealer
1)
X
Fuel pick-up body / filter in fuel tank
Check X
Clean, replace filter insert XX
Replace XXX
Fuel tank Clean X
Lubricating oil tank Clean X
Chain lubrication Check X
Saw chain
Check, pay attention to sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over X
Deburr X
Replace XX
Chain sprocket Check X

Stihl MS362C-M Specifications

General

Engine Power	3.5 kW
STIHL M-Tronic	Yes
Chain Pitch	3/8"
Weight	5.9 kg
Guide Bar Length	40-50 cm
Displacement	59 cm³