Need help?Do you have a question about the Stihl MS 391 and is the answer not in the manual?
General| Motor type | 2-stroke motor |
|---|---|
| Chain gauge | 1.6 mm |
| Chain pitch | 3/8 \ |
| Automatic oiling | Yes |
| Oil tank capacity | 0.35 L |
| Fuel tank capacity | 0.6 L |
| Engine displacement | 64.1 cm³ |
| Engine power | 4.4 hp |
| Power source | Gasoline |
Weight and Dimensions| Weight | 6200 g |
|---|
Safety regulations, fuel handling, protective measures, and general warnings.
Technical specifications for the engine, including displacement, bore, stroke, and power.
Table of fasteners and their specified tightening torques for assembly.
Troubleshooting guide for clutch issues like worn parts or incorrect operation.
Troubleshooting for chain drive, brake, and tensioner issues like wear or malfunction.
Troubleshooting for chain lubrication problems like no oil or oil loss.
Troubleshooting for rewind starter issues like broken rope or slow rewind.
Troubleshooting for ignition system issues like rough running or irregular spark.
Troubleshooting for engine issues like starting problems, lack of power, or overheating.
Procedures for removing and installing the clutch drum.
How to check the efficiency and function of the chain brake.
Procedures for removing and installing the brake band.
Procedures for removing and installing the brake lever.
Procedures for removing and installing the chain tensioner.
Procedures for removing and installing the muffler and exhaust gasket.
Procedure for testing the engine for leaks using vacuum and pressure tests.
Procedures for replacing oil seals on the ignition and clutch sides.
Procedures for removing and installing the cylinder and crankshaft.
Procedures for removing and installing crankshaft bearings.
How to test the ignition module using specific testers.
Troubleshooting chart for ignition system faults and no-spark conditions.
Procedures for removing and installing the carburetor.
To Next Page
