Need help?Do you have a question about the Stihl MS 361 and is the answer not in the manual?
General| Engine Displacement | 59.0 cm³ |
|---|---|
| Engine Power | 3.4 kW / 4.6 hp |
| Weight | 12.3 lbs |
| Fuel Capacity | 0.68 l (23 oz) |
| Guide Bar Length | 40-63 cm (16-25 in) |
| Fuel Tank Volume | 0.68 l |
| Chain Pitch | 3/8" |
Explains symbols used in the manual for operation and warnings.
Discusses product modifications and updates.
Covers user responsibility, health, and authorized applications.
Details required protective gear for safe operation.
Explains kickback, its dangers, and how to reduce the risk.
Provides techniques to minimize kickback risks during operation.
Describes safe and effective cutting methods for various situations.
Covers the use and fitting of chain scabbards and extensions.
Steps for removing the cover and disengaging the chain brake.
Instructions for correctly installing the saw chain onto the bar.
Details how to adjust and verify chain tension during use.
Covers gasoline, oil, mixing ratios, and STIHL MotoMix.
Steps for safely preparing and opening the fuel filler cap.
Discusses chain oil quality, aging, and handling precautions.
Steps for cleaning the cap and filling the chain oil tank.
How to check if the chain is receiving sufficient oil.
Instructions for engaging, disengaging, and maintaining the chain brake.
Adjusting the carburetor for cold weather to prevent icing.
Explains the functions of the Master Control lever positions.
Guides on moving the Master Control lever for different starting conditions.
Two methods for holding the saw during starting.
How to use the decompression valve and start the saw.
Instructions for safely stopping the engine.
Guidelines for running the saw during its initial period and normal use.
Procedures for adjusting chain tension at different temperatures and cooling the engine.
How to adjust the automatic oil pump for chain lubrication.
Instructions for cleaning, flipping, and measuring the guide bar.
Describes fabric and fleece filters for different conditions.
Steps for removing, cleaning, and installing the air filter.
Factory settings and adjustment principles for the carburetor.
Procedures for setting idle speed and troubleshooting idle issues.
How to remove and inspect the spark plug.
How to check the spark plug gap and common causes of fouling.
Steps for preparing the chainsaw for extended storage.
Instructions for checking, replacing, and installing chain sprockets.
Importance of a sharp chain and checks for damage.
Using a file holder and correct sharpening methods.
How to set the depth gauge for optimal cutting.
Procedures for checking and lowering depth gauges after sharpening.
Lists STIHL tools and part numbers for chain sharpening.
Labeled diagram identifying all major parts of the chainsaw.
Details engine displacement, bore, stroke, and cutting attachment dimensions.
Technical data on sound levels, vibration, and exhaust emissions.
Information on EC regulations and chemical substance compliance.
Instructions for ordering replacement parts with model and part numbers.
Procedures for authorized maintenance and repair work.
Guidelines for environmentally friendly recycling and disposal.
States conformity with EU directives and relevant standards.
To Next Page