Stihl MS 361 C

Instruction Manual
Manual de instrucciones
STIH)
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL RM2,
RMC3 (0,325") or RM2, RSC3 (3/8") chain
depending on sprocket or other available low
kickback components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena RM2, RMC3
(0,325 pulg) o RM2, RSC3 (3/8 pulg) de
STIHL, dependiendo de la rueda dentada
usada y de otros componentes reductores de
contragolpe.
STIHL MS 361 C
BA_MS361C_86_U_M6.book Seite 0 Mittwoch, 22. November 2006 11:19 11

Stihl MS 361 C Specifications

General

Brand	Stihl
Model	MS 361 C
Category	Chainsaw
Language	English

Summary

Secondary Chain Braking System

Chain Brake Activation Methods

Explains the three ways the chain brake can be activated for safety.

Secondary Braking System Mechanism

Details the rear-handle activated system integrated with the throttle interlock.

Guide to Using this Manual

Pictograms and Symbols

Explains pictograms and symbols used in the manual for clarity.

Equipment and Features

Details components not installed on all models and available special accessories.

Safety Precautions and Working Techniques

General Safety Warnings

Essential precautions to reduce the risk of personal injury during chainsaw use.

Operator Condition and Fatigue

Emphasizes the importance of good physical and mental health for safe operation.

Vibration and Hand Health

Discusses risks of vibration-related diseases and prevention measures.

Proper Protective Clothing

Recommends appropriate apparel and footwear for operator safety.

Reactive Forces and Kickback

Understanding Reactive Forces

Explains how reactive forces like kickback can occur and cause injury.

Kickback Mechanism and Factors

Details what causes kickback and factors influencing its force.

Reducing Kickback Injury Risk

Discusses ANSI standards and devices designed to reduce kickback.

Cutting Techniques

Felling a Tree Safely

Guidance on safely felling trees, considering environmental factors and escape paths.

Limbing and Bucking

Techniques for removing branches and cutting logs into sections safely.

Maintenance and Adjustments

Mounting the Bar and Chain

Step-by-step guide for properly installing the guide bar and saw chain.

Tensioning the Saw Chain

Instructions for correctly adjusting chain tension for safety and performance.

Fuel and Lubrication System

Covers fuel requirements, fueling procedures, and chain oiling.

Air Filter System Maintenance

How to clean or replace the air filter for optimal engine performance.

Adjusting the Carburetor

Procedures for adjusting carburetor settings for different conditions.

Maintaining and Sharpening Saw Chain

Essential steps for keeping the saw chain sharp and in good condition.

Maintenance Chart

A comprehensive schedule for routine maintenance tasks and intervals.

Starting and Stopping the Engine

Starting Procedures

Detailed instructions for safely starting the chainsaw engine.

Engine Shutdown and Troubleshooting

Steps to turn off the engine and diagnose starting issues.

Operating Instructions

Break-in Period and Operation

Guidelines for initial use, chain tension checks, and post-operation procedures.

Taking Care of the Guide Bar

How to maintain the guide bar for longevity and performance.

Chainsaw Components and Specifications

Main Parts of the Saw

Illustrated breakdown of the chainsaw's primary components.

Technical Specifications

Provides key technical data for the chainsaw model.

Warranty and Legal Information

Maintenance and Repairs

Guidelines for performing maintenance and handling repair work.

Federal Emission Control Warranty

Details the warranty coverage for the emission control system.