Stihl MS 280 C

Instruction Manual
Manual de instrucciones
STIH)
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL RM2
or RMC3 (.325") chain depending on
sprocket or other available low kickback
components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena RM2 o
RMC3 (.325 pulg) de STIHL, dependiendo de
la rueda dentada usada y de otros
componentes reductores de contragolpe.
STIHL MS 280 C
BA_MS280C_86_U_J6.book Seite 0 Montag, 4. September 2006 1:47 13

Stihl MS 280 C Specifications

General

Engine Type	2-stroke
Chain pitch	3/8"
Power Output	3.0 kW
Bar Length	40 cm
Oilomatic Chain Type	3/8"

Summary

Secondary Chain Braking System

Guide to Using this Manual

Pictograms

Explains pictograms used in the manual and on the machine.

Symbols in text

Explains different ways steps and procedures are marked in the text.

Some Important Safety Precautions for Chain Saw Users

A. A Summary of Warnings on kickback and other Selected Risks

Details kickback risks and precautions, referencing ANSI standards.

B. Other Safety Precautions

Lists additional safety measures for operating the chainsaw.

Safety Precautions and Working Techniques

Proper Clothing

Details required protective apparel for safe chainsaw operation.

Fuel

Fueling Instructions

Before Starting

Starting the Engine

If the engine doesnt start

During operation

Check chain tension frequently

Explains the importance of checking chain tension during use.

Taking Care of Guide Bar

Adjusting the Carburetor

Adjusting Idle Speed

Instructions for adjusting idle speed for various engine behaviors.

Checking the Spark Plug

Maintaining and Sharpening Saw Chain

Maintenance Chart

Specifications

Maintenance and Repairs