Stihl MS 201 C

{
STIHL MS 201
Instruction Manual
Manual de instrucciones
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL
PMC3, PS3 or PD3 (3/8" Picco) chain
depending on sprocket pitch or other available
low kickback components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena PMC3, PS3
o PD3 (Picco de 3/8 pulg) de STIHL,
dependiendo de la rueda dentada usada y de
otros componentes reductores de
contragolpe.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.

Stihl MS 201 C Specifications

General

Power Output	1.8 kW
Displacement	35.2 cm³
Bar Length (recommended)	30-40 cm
Fuel Tank Volume	0.31 L
Chain Pitch	3/8" P
Sound Pressure Level	100 dB(A)
Sound Power Level	112 dB(A)
Bar Length	35 cm
Chain Oil Capacity	0.22 L
Oil Tank Volume	0.2 L
Oilomatic Chain Pitch	3/8"

Summary

Guide to Using this Manual

Pictograms

Explains symbols found on the machine and their meanings.

Symbols in Text

Explains how steps and procedures are marked in the manual.

Safety Precautions and Working Techniques

THE OPERATOR

Details operator requirements for safe chainsaw use, including physical and mental condition.

Physical Condition

Operator's physical and mental state requirements for safe operation.

Proper Clothing

Guidelines on protective apparel, footwear, and hearing protection.

THE POWER TOOL

Transporting the Power Tool

Instructions for safely carrying the chainsaw, including grip and orientation.

Fuel

Fueling Instructions

Procedures and safety precautions for refueling the chainsaw.

Before Starting

Starting

Important Adjustments

Guidance on making necessary adjustments to the tool for optimal function.

During Operation

How to operate the chainsaw correctly and safely during use.

Holding and Controlling the Power Tool

Proper grip and body positioning for optimal control and safety.

Working Conditions

Operating Instructions

Reactive Forces including Kickback

To avoid Kickback

Steps and techniques to prevent kickback situations.

Cutting Techniques

Felling

Instructions for safely cutting down trees.

Bucking

Techniques for cutting logs into sections.

MAINTENANCE, REPAIR AND STORING

Cutting Attachment

Information on the saw chain, guide bar, and sprocket.

Mounting the Bar and Chain

Tensioning the Saw Chain (side chain tensioner)

How to adjust the chain tension using the side tensioner.

Checking Chain Tension

How to verify the proper chain tension.

Fueling

Chain Lubricant

Filling Chain Oil Tank

How to refill the chain oil reservoir.

Chain Brake

Starting Stopping the Engine

Holding the chain saw

Proper ways to hold the chainsaw during starting.

Between the knees or thighs

An alternative method for holding the saw during starting.

Adjusting the Carburetor

Setting the idle speed

Adjusting the idle speed for smooth engine operation.

Spark Plug

Checking the Spark Plug

How to check and clean the spark plug.

Replacing the Starter Rope and Rewind Spring

Installing the rope rotor

Procedure for installing the rope rotor.

Storing the Machine

Maintaining and Sharpening the Saw Chain

Sharpening and Side Plate Angles

Correct angles for sharpening chain cutters and side plates.

Depth gauge setting

Adjusting the depth gauge for proper cutting.

Maintenance and Care

Main Parts

Specifications

Cutting Attachment

Details on recommended bars, chains, and sprockets.

Ordering Spare Parts

STIHL Incorporated Federal Emission Control Warranty Statement

Owners Warranty Responsibilities

Owner's duties regarding maintenance and warranty claims.

Trademarks