Need help?Do you have a question about the Stihl MS 211 C-BE and is the answer not in the manual?
General| Displacement | 35.2 cm³ |
|---|---|
| Power output | 1.7 kW |
| Oilomatic chain type | Picco Micro 3 (PM3) |
| Guide Bar Length | 35 cm |
| Chain pitch | 3/8" |
Explains symbols depicted on the machine.
Clarifies symbols used within the instruction manual.
Covers regulatory compliance and general safe operation.
Defines authorized use and required personal protective equipment.
Details necessary pre-operation checks for safe starting.
Outlines procedures for safe handling while the saw is running.
Procedures for safely ending operation and storing the machine.
Identifies risks and causes of kickback during operation.
Explains chain reactions like pull-in and pushback.
Describes various techniques for cutting wood efficiently.
Outlines steps for preparing and executing tree felling.
Instructions for installing the cutting attachment components.
Procedure for adjusting chain tension using the side mechanism.
Procedure for adjusting chain tension using the quick mechanism.
Method for checking and confirming correct chain tension.
Guidelines for preparing, mixing, and storing fuel.
Steps to ensure safe and clean refueling.
Instructions for operating various fuel filler cap designs.
Recommendations for selecting and using chain lubricant.
Steps for refilling the chain lubrication oil tank.
Details on operating, checking, and servicing the chain brake.
Explains the positions and operations of the master control lever.
Step-by-step guide to safely start the engine.
Guidance for the initial operating phase of a new machine.
Best practices for using the saw during normal operation.
Recommendations for maintaining the guide bar.
Procedure for cleaning or replacing the air filter system.
Instructions for adjusting carburetor settings for optimal performance.
How to check, service, and replace the spark plug.
Guidance on angles, depth gauges, and proper sharpening methods.
Overview of maintenance activities and their recommended intervals.
Summary of critical maintenance tasks for longevity.
Specifications related to engine displacement, bore, stroke, and power.
Details on guide bars, chains, and sprockets.
Measured sound and vibration emission levels.
Guidelines for proper disposal of the product and packaging.
Declaration of adherence to UK product safety regulations.
To Next Page
