Stihl MS 211 C-BE User Manual

► Remove the filler cap
12.3.2 Filling with fuel
Take care not to spill fuel while fueling and do
not overfill the tank.
STIHL recommends using the STIHL filling sys‐
tem for fuel (special accessory).
► Fill with fuel
12.3.3 Closing
001BA220 KN
Bracket is in an upright position:
► Position filler cap – position markings on the
filler cap and the filler port must be aligned
with each other.
► Push the filler cap down as far as it will go
001BA221 KN
► Hold the filler cap down and turn it clockwise
until it engages
001BA222 KN
► Fold down the bracket as far as it will go
12.3.4 Checking the lock
001BA223 KN
–
The lug on the bracket must engage entirely in
the recess (arrow)
001BA225 KN
► Grip the filler cap – if the filler cap cannot be
moved or removed, then it is closed properly
12.3.5 If the filler cap can be moved or
removed
The base of the filler cap is twisted in relation to
the upper part.
001BA227 KN
left: Base of filler cap twisted
right: Base of filler cap correctly posi‐
tioned
12 Fueling English
0458-533-0121-E 21

Stihl MS 211 C-BE Specifications

General

Displacement	35.2 cm³
Power output	1.7 kW
Oilomatic chain type	Picco Micro 3 (PM3)
Guide Bar Length	35 cm
Chain pitch	3/8"