Stihl MS 211 C-BE User Manual

001BA226 KN
► Fit filler cap and turn it counterclockwise until it
engages in the seat of the filling port
► Continue to turn the filler cap counterclockwise
(approx. 1/4 turn) – this will twist the base of
the cap into the correct position
► Turn the filler cap clockwise and close it – see
the section "Closing" and "Checking the lock"
12.4 Filler cap with marking
12.4.1 To open:
001BA236 KN
► Open bracket
001BA232 KN
► Turn filler cap (approx. 1/4 turn)
001BA234 KN
Markings on filler cap and fuel tank must align
001BA237 KN
► Remove the filler cap
12.4.2 Filling with fuel
Take care not to spill fuel while fueling and do
not overfill the tank.
STIHL recommends using the STIHL filling sys‐
tem for fuel (special accessory).
► Fill with fuel
12.4.3 Closing
001BA234 KN
Bracket is in an upright position:
► Position filler cap – markings on filler cap and
fuel tank must align
► Push the filler cap down as far as it will go
English 12 Fueling
22 0458-533-0121-E

Stihl MS 211 C-BE Specifications

General

Displacement	35.2 cm³
Power output	1.7 kW
Oilomatic chain type	Picco Micro 3 (PM3)
Guide Bar Length	35 cm
Chain pitch	3/8"