Stihl MS 362 C-M User Manual

{
STIHL MS 362 C-M
Instruction Manual
Manual de instrucciones
WARNING
To reduce the risk of kickback injury
use STIHL reduced kickback bar and
STIHL RM3 or RS3 (3/8") chain depending on
sprocket pitch or other available low kickback
components.
ADVERTENCIA
Para reducir el riesgo de lesionarse
como resultado de un culatazo, utilice
la barra de contragolpe reducido y la cadena
RM3 o RS3 (3/8 pulg) de STIHL, dependiendo
de la rueda dentada usada y de otros
componentes reductores de contragolpe.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de seguridad
dadas en el manual de instrucciones – el uso
incorrecto puede causar lesiones graves o
mortales.

Stihl MS 362 C-M Specifications

General

Displacement	59.0 cm³
Power Output	3.5 kW
STIHL Oilomatic saw chain pitch	3/8"
Engine displacement	59.0 cm³
Chain pitch	3/8"
Vibration levels left/right	3.5/3.5 m/s²
Sound power level	117 dB(A)
Sound pressure level	106 dB(A)
Fuel Capacity	0.5 liters
Chain Oil Capacity	0.26 liters
Guide Bar Length	40 cm / 16 in
Fuel tank volume	0.5 liters
Oil tank volume	0.325 L

Summary

Guide to Using this Manual

Pictograms

Explanation of pictograms attached or embossed on the machine.

Symbols in Text

Explanation of symbols and signal words used in the manual.

Engineering Improvements

Safety Precautions and Working Techniques

Physical Condition

Requirements for operator's physical and mental health.

Proper Clothing

Guidance on appropriate protective apparel for safe operation.

THE POWER TOOL

Transporting the Power Tool

Safety instructions for carrying and transporting the power tool.

Fuel

Information on the type of fuel mixture required for the STIHL saw.

Fueling Instructions

Before Starting

Holding and Controlling the Power Tool

Working Conditions

Operating Instructions

Chain Brake Maintenance

Maintenance intervals for the chain brake.

Reactive Forces Including Kickback

ANSI/OPEI B 175.1-2012 chain saw kickback standard

Devices for Reducing the Risk of Kickback Injury

STIHL Quickstop Chain Brake

Description of the STIHL chain stopping system.

Low Kickback Saw Chain and Reduced Kickback Bars

To avoid kickback

Cutting Techniques

Felling Instructions

Steps and considerations for safely felling a tree.

Escape Path

Establishing safe escape routes when felling trees.

Buttress Roots

Gunning Sight

Conventional Cut

Open-face Technique

Making Sapwood Cuts

Felling Cut

Hinge

Felling Cut for Small Diameter Trees

Felling Cut for Large Diameter Trees

Sectioning Method

Plunge-cut Method

Limbing

Bucking

Cutting Attachment

Chain scabbard

Fitting chain scabbard extension

Instructions for attaching chain scabbard extensions.

Removing the chain sprocket cover

Mounting the Bar and Chain

Disengaging the chain brake

Fitting the chain

Tensioning the Chain

Fueling

Chain Lubricant

Filling Chain Oil Tank

Procedure for filling the chain oil tank.

Chain Brake

Checking Chain Lubrication

Checking the saw chain for proper oil lubrication.

Releasing the chain brake

Instructions on how to disengage the chain brake.

Winter Operation

Preheating the carburetor

Procedure for preheating the carburetor in cold weather.

Cover plate

Information on fitting the optional cover plate.

Electric Handle Heating

Starting / Stopping the Engine

Positions of Master Control Lever

Explanation of the master control lever positions.

Holding the Saw

Correct hand positions for holding the saw.

On the ground

Between knees or thighs

Cranking

Starting the Saw

Decompression valve

How to use the decompression valve for easier starting.

As soon as the engine runs

Actions to take immediately after the engine starts.

Operating Instructions

At very low outside temperatures

Adjustments for operating in very low temperatures.

Stopping the engine

Procedure for stopping the engine.

If engine does not start

Troubleshooting steps if the engine fails to start.

Chain at operating temperature

After a long period of full-throttle operation

After finishing work

Short-term storage

Long-term storage

Oil Quantity Control

Taking Care of the Guide Bar

Shroud

Removing the Shroud

Procedure for removing the engine shroud.

Installing the Shroud

Procedure for installing the engine shroud.

Cleaning the Air Filter

Engine Management

M-Tronic

Spark Arresting Screen in Muffler

Spark Plug

Removing the Spark Plug

Procedure for removing the spark plug.

Checking the Spark Plug

Installing the Spark Plug

Rewind Starter

Storing the Machine

Checking and Replacing the Chain Sprocket

Maintaining and Sharpening the Saw Chain

Chain pitch

Sharpening and side plate angles

File holder

Instructions for using a file holder for sharpening.

To check the angles

Method for checking sharpening and side plate angles.

Proper sharpening

Depth gauge setting

Lowering the depth gauges

Procedure for lowering depth gauges after sharpening.

Use a file holder

Maintenance and Care

Main Parts

Definitions

Specifications

Special Accessories

Ordering Spare Parts

Maintenance and Repairs

Disposal

STIHL Incorporated Federal Emission Control Warranty Statement

Manufacturer's Warranty Coverage

Warranty coverage for engine emission control systems.

Owner's Warranty Responsibilities

Owner's responsibilities regarding maintenance and warranty.

Cobertura por STIHL Incorporated

Período de garantía

Details about the warranty period for the equipment.

Diagnóstico

Procedures for diagnosis of warranty issues.

Trabajo bajo garantía

Information on warranty repair procedures.

Dónde presentar el reclamo para servicio bajo garantía

Requerimientos de mantenimiento

Limitaciones

Marcas comerciales