Stihl MS 362 User Manual

{
STIHL MS 362
Instruction Manual
Manual de instrucciones
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL
RMC3 or RSC3 (3/8") chain depending on
sprocket pitch or other available low kickback
components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra de
contragolpe reducido y la cadena RMC3 o
RSC3 (3/8 pulg) de STIHL, dependiendo de la
rueda dentada usada y de otros componentes
reductores de contragolpe.
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.

Stihl MS 362 Specifications

General

Displacement	59.0 cm³
Powerhead Weight	5.6 kg
Chain pitch	3/8"
Vibration level (left/right)	3.5/3.5 m/s²
Weight	5.6 kg
Guide Bar Length	40-50 cm (16-20 in)
Oil Capacity	325 cc
Weight (without cutting equipment)	5.6 kg
Oil tank volume	325 cc

Summary

Safety Precautions and Working Techniques

Operator Safety and Requirements

Operator's physical state, safe handling, protective gear, and general warnings.

Kickback and Reactive Forces

Explanation and warnings regarding kickback and other reactive forces.

Vibration Effects and Prevention

Explains vibration effects and methods to reduce risks.

Chain Safety and Kickback Reduction

Information on kickback standards, chain brake, and low kickback components.

Felling and Cutting Techniques

Procedures and safety for felling trees and various cutting methods.

Guide to Using This Manual

Pictograms and Symbols

Explains the meaning of pictograms and text symbols used.

Chainsaw Operation and Fueling

Fuel System and Fueling

Information and instructions for fueling the chainsaw safely.

Engine Starting and Operation

Engine Operation and Stopping

Procedures for managing the engine once it's running and how to shut it off.

Chain Maintenance and Tensioning

Chain Lubricant and Filling

Recommendations for chain lubricant and instructions for filling the oil tank.

Engine and Air Filter Maintenance

Carburetor Adjustment

Procedures for adjusting carburetor settings and idle speed.

Chain Sharpening and Depth Gauge

Depth Gauge Setting and Adjustment

How to set and adjust the depth gauges for proper cutting.

Maintenance Schedule and Specifications

Specifications

Technical specifications for the chainsaw.

Maintenance, Repairs, and Warranty

STIHL Emission Control Warranty

Details of the emission control system warranty.

Accessories, Ordering, and Trademarks

Trademarks and Limitations

List of STIHL trademarks and warranty limitations.