Need help?Do you have a question about the Stihl MS 310 and is the answer not in the manual?
Troubleshooting for clutch, chain drive, brake, and tensioner issues.
Instructions for removing and inspecting the clutch drum/chain sprocket.
Steps to prepare the engine for leakage testing.
Information on the fixed ignition timing and its non-adjustability.
Steps for removing and installing the ignition module.
Steps for removing and installing the carburetor.
Steps for testing and replacing the metering diaphragm.
Standard setting and idle speed adjustment for carburetors without limiter caps.
Standard setting and adjustments for carburetors with limiter caps.
To Next Page
General
