RMA 370
English
17
During Charging Process
The light emitting diodes glow
continuously or flash to indicate the
progress of charge.
During charging the capacity that is
currently being charged is indicated by a
green flashing light emitting diode.
When the charging process is
completed, the light emitting diodes on
the battery go off automatically.
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
During Operation
The green light emitting diodes glow
continuously or flash to indicate the state
of charge.
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
If the red light emitting diodes glow
continuously / flash
1 light emitting
diode glows con
-
tinuously red:
Battery is too hot
1)
2)
/cold
1)
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
4 light emitting
diodes flash red:
Fault in battery
3)
3 light emitting
diodes glow con
-
tinuously red:
Power tool is too
hot – allow it to cool
down.
3 light emitting
diodes flash red:
Fault in power tool
4)
To Next Page
Loading...
